Conveyor Belt

PT BANDO INDONESIA is today the leading manufacturer of conveyor belt in Indonesia. PT Bando Indonesia is a joint venture manufacturing company between PT Kreasi Utama Investama (Gajah Tunggal Group) and Bando Chemical Industries Ltd Japan, which is one of the world’s leading integrated manufacturers of rubber belts since 1906. PT Bando Indonesia factory was establised since 1987 and located at Kawasan Industri Gajah Tunggal di Jatiuwung Tangerang.

Ranadityo Sukses Makmur (RSM) has been appointed by PT Bando Indonesia as An Authorized Agent since 2010 to sale and distribute Conveyor Belt “BANDO”and Rubber Sheet & Rubber Lining “BANDO”.

 

Product Range

 

Belt width                                : 300 ~ 2.200 mm

Belt length                              : Min 30 meters

Top Cover thickness                : 0 ~ 30 mm

Bottom Cover thickness          : 0 ~ 30 mm

Number of ply                         : 1 ~ 8 ply

Belt strength                           : 100 ~ 2.800 kgf/cm

Packing weight                        : 20 ton max

Roll Diameter                         : 3.4 m max

Selection of canvas                 : EP (Polyester-Nylon)

Selection of cover rubber      

General Use                : JIS-L, JIS-G, JIS-S, Grade M

Special Use

Impact & abrasive      : UIP, SAR

Heat Carry                  : HC 510, HC 513, HR 710

Oil Resistance            : OR 210, OR 220

Flame Resistance        : FR 300J

Chemical Resistance   : CR

 

Cover Rubber

 

NO GENERAL USE SPECIAL USE
1. JIS-L

Used for general conveyor belts with low abrasive materials and don’t need a high tension. Abrasion loss max 400 mm3.

Impact & Abrasive :
UIP (Ultra Impact Protection)

Superior in impact resistance also cut and gouge resistance. Suitable for conveying large size lumps, sharp and rugged materials. (Primary Crusher)

 

SAR (Super Abrasive Resistant)

Superior in impact resistance also cut and gouge resistance. Suitable for conveying large size lumps, sharp and rugged materials. (Primary Crusher)

2. JIS-G

Used for general conveyor belts with medium abrasive materials and medium tension. Abrasion loss max 250 mm3.

 

Heat Carry :
HC-510

SBR type standard Heat Resistant belt with excellent abrasion resistance. Max temperature of material handled is 150o C and max temp of belt surface is 100o C.

 

HC-513

Characteristics and performance like HC-510, but HC-513 have abrasion and crack resistance better than HC-510.

 

HC-710

Characteristics and performance like HC-510, but HC-513 have abrasion and crack resistance better than HC-510.

3. JIS-S

Used for general conveyor belts with high abrasive materials and high tension. Abrasion loss max 200 mm3.

Oil Resistant :
OR-210

Characteristics and performance like HC-510, but HC-513 have abrasion and crack resistance better than HC-510.

 

OR-220

Characteristics and performance like HC-510, but HC-513 have abrasion and crack resistance better than HC-510.

4. Grade M

Used for general conveyor belts with high abrasive materials and high tension. Abrasion loss max 200 mm3.

Flame Resistant :
FR-300J

Characteristics and performance like HC-510, but HC-513 have abrasion and crack resistance better than HC-510.

5. Chemical Resistant :
CR

For handling various kinds of chemicals or

materials mixed with chemical contents such

as phosphate base fertilizer, etc.

 

Bando Conveyor Product

NO LOCAL PRODUCTION JAPAN PRODUCTION
  Manufactured by PT Bando Indonesia Factory at Jatiuwung, Tangerang Manufactured by Bando Chemical Industries Ltd Japan
1. Multi-Ply Conveyor Belt

§  Suncon (Multi-Ply)

§  Sunlon (Less-Ply)

Pipe Conveyor Belt
2. Heat Carry Conveyor Belt Sunline Conveyor Belt

Applicable at Food Industry.

3. Flame Resistant Conveyor Belt Flexowell Conveyor Belt
4. Oil Resistant Conveyor Belt
5. Chemical Resistant Conveyor Belt
6. Rough Top Conveyor Belt
7. V-Cleat Conveyor Belt
8. Bucket Elevator Conveyor Belt
9. Steel Cord Conveyor Belt

 

PRODUCT ROUGH TOP V-CLEAT
 
Application Belt has a loosely textured surface suitable for conveying bags and package up to a maximum incline of 300. Designed for conveying granular materials amd bagged materials such as gravel, iron ore pellets, etc on inclines of up to 300.
Features Strong corrugated surface textured which absorb impact and prevent conveyed objects from shifting or falling off the belt. This belt is produced with vulcanized cleat for better durability.

Belt width : 300 ~ 1.000 mm

Cleat height : 5 mm

Cleat width : 12 mm

Cleat angle : 1200

Cleat pitch           : 75 mm

Cover rubber : all types available except   HC-513 & HC-710.

Range of Production Belt width : 300 ~ 1.200 mm

Cover rubber : rough top

 

PRODUCT BUCKET ELEVATOR STEEL CORD
 
Application Buckets can be attached with bolts to vertically installed belt, which is suitable for conveying bulk material such as grains, cement materials and other fine particle products. Long span, high strength, high capacity.
Features 1.       High tensile strength permit high tension operation.

2.       Excellent bending resistance.

3.       Extremely small elongation.

4.       Excellent dynamic adhesion.

5.       Excellent impact resistance.

Range of Production Belt Width : 300 ~ 2.200 mm

Cover rubber : all types availables.

Belt width : 800 ~ 1.800 mm

Belt strength : ST-500 ~ ST-5000

Cover rubber : Grade M, JIS-S, SAR, UIP,

FR 300J, Low Rolling Resistant (LRR)

 

PRODUCT PIPE SUNLINE
 
Application With the belt in a cylindrical shape, pipe conveyors are an eco-friendly transport, as they are spill-free with minimal dispersion. Suitable for a variety of food transport applications, including unpackaged foods. Also for handling electronic parts and for electrical appliance assembly lines.
Features No spillage with enclosed structure conveyance, and minimal load dispersion. There is no load spillage on the return side as well.  Curved conveyance (flat or inclined) is possible with pipe belts. As a result, obstacles can be designed around and avoided, and the number of conveyors can be reduced.  Since the belt becomes cylindrical, steep incline conveyance is possible compared with trough conveyors. Smaller pulleys reuired and less energy expended, Dimensionally stable with less stress, A variety of covers are available, Splicing of Subline belts is easily accomplised.

Sulne surface cobers are made of polyurethane, PVC, polyester, synthetic rubber, flourine resin film and silicone. The carcass is polyester.

 

PRODUCT FLEXOWELL
 
Application Provide the flexibility to work at various angles, allowing for space savings and reducing facilities costs. There is less noise, dust and falling debris compared with chain conveyors, and greater oil resistance and flame resistance. The belts are also suitable for use in waste disposal facilities. It can be applied to step inclines up to 900
Features 1.   Space saving.

1.       Freely design conveyor line angles.

2.       High capacity conveyance.

3.       Reduced facility costs.

 

For detail information please open this link E-Catalogue >> 02a. BANDO – Conveyor Belt Catalogue

             >> 02b. BANDO – Conveyor Belt, Rubber Sheet, Rubber Lagging Presentation

             >> 02c. BANDO – How to Maintenance Conveyor Belt

             >> 02d. BANDO – Video Uji Bakar Conveyor Belt FR 300 J (Fire Resistance)

             >> 02e. BANDO – Video Uji Bakar Conveyor Belt Non FR 300 J (Non Fire Resistance)